Here’s my latest printer, it started out as a copy of Whosawhatsis’s Cranestyle Mini, but diverged when I had some difficulties getting the linear rails I ordered. The 12mm rails from AliExpress were delayed, then missing, then the wrong size. In the meantime, a friend gave me some linear guideways and a 14mm linear rail and I ended up building this printer around those.
There are other changes, the most significant ones are the extruder (went with a pivoting dual drive setup), the fans (I used blower style fans), and the controller (DuetWifi). I plan to write more about those changes in future posts.
Most of the parts are printed in Atomic Filament Emerald Green PETG. but I also used 3D Solutech See Through Green ABS* and Octave Flourescent Green ABS*.
*affiliate links